Freudenberg-NOK Levitex® Gas-Lubricated Mechanical Face Seal Presented at 35th International Vienna Motor Symposium - NBC12.com - Richmond, VA News

Freudenberg-NOK Levitex® Gas-Lubricated Mechanical Face Seal Presented at 35th International Vienna Motor Symposium

Information contained on this page is provided by an independent third-party content provider. WorldNow and this Station make no warranties or representations in connection therewith. If you have any questions or comments about this page please contact pressreleases@worldnow.com.

SOURCE Freudenberg-NOK Sealing Technologies

Seal will help vehicle manufacturers address CO2 challenges

VIENNA, May 7, 2014 /PRNewswire/ -- Freudenberg-NOK Sealing Technologies is presenting its revolutionary Levitex® crankshaft seal – capable of reducing crankshaft friction up to 90 percent – at the 35th International Vienna Motor Symposium today.

Freudenberg-NOK will present the innovation in response to the European Union's goals of reducing total carbon dioxide (CO2) emissions to 95 grams of CO2 per kilometer by 2021.

The gas-lubricated Levitex mechanical face seal comes very close to the vision of a frictionless seal.  The seal consists of a stationary primary ring and – on the oil side – a rotating mating ring. During operation, grooves creating an aerodynamic effect form an air cushion that separates the two rings. The primary and mating rings also have a special coating to reduce wear and friction when the crankshaft is at rest.

Independent measurements of the Levitex seal on a seal test stand are already showing greatly reduced friction even at low rotational speeds. The measured frictional torque is 0.2 to 0.3 Newton meters lower than the values for a friction-optimized polytetrafluoroethylene (PTFE) seal and a standard PTFE seal. The remaining friction is due to air shear. 

The Levitex crankshaft seal will help auto manufacturers address friction reductions in the engine and drivetrain, a key to reducing vehicle CO2 emissions. A radial shaft seal typically seals a rotating crankshaft at its housing. An oil film minimizes its contact with the shaft. Still, the remaining loss of performance can be as high as 1 gram of CO2 per kilometer.

With the new Levitex seal, the frictional losses from a crankshaft seal are reduced by up to 90 percent compared to a standard PTFE seal. This leads to less fuel consumption and wear, as well as a longer service life. Further, CO2 emissions at the sealing point fall from the 0.5- to 1-gram range to less than 0.1 grams under the New European Driving Cycle.  

A video clip on Levitex can be found at: http://levitex.fst.com.

Freudenberg-NOK Levitex® Seal Presented at Vienna Motor Symposium

About Freudenberg-NOK Sealing Technologies
Freudenberg-NOK Sealing Technologies is the Americas joint venture between Freudenberg and Co. in Germany and NOK Corp. in Japan. Freudenberg-NOK is a leading producer – through its Automotive, Merkel, Process Seals and Simrit sales channels – of advanced sealing technologies for a variety of markets including: aerospace; agriculture;  appliance; automotive; construction; diesel engine; energy; food and beverage; heavy industry; and pharmaceutical. Founded in 1989 under the legal name Freudenberg-NOK General Partnership, Freudenberg-NOK is headquartered in Plymouth, Mich. and operates more than 20 facilities across the Americas. For additional information, please visit www.fnst.com.

©2012 PR Newswire. All Rights Reserved.

Powered by WorldNow